Sunday, June 8, 2008

Waterbeds and Sex Part 1- Hardside Waterbeds

The Waterbeds and the Bees

When considering which type of waterbed might best suit your sexual preferences we offer the following primer; If you choose a hardside waterbed with a full motion (aka freeflow) water mattress, you can expect wild, exciting active sex. Alternately, a wood frame waterbed with a reduced motion, or waveless waterbed mattress would allow for a slower, more sensual sex. After having chosen your new indoor playground, (which happens to also be the most comfortable sleeping surface on earth), you may need to make some minor adjustments.
First, feel how the warm water relaxes you and your partner during foreplay. A heated waterbed mattress can stimulate blood circulation, priming your bodies for a sexual encounter.
Next, you may need to modify your technique. Methods that worked well before may no longer be the best approach on a waterbed. As any surfer knows, when it comes to waves, timing is everything. Familiarize yourself with the wave energy and notice the reaction of the bed in response to your movement.
You may need to experiment with a few various positions to see which ones work best for you and your partner. While some find it difficult to to get leverage on a waterbed mattress no matter which partner is on top, others find it to be unecessary and learn to just "go with the flow". Remember, for each movement you make you get two free. Now, all you need is love, tiger!
Next; Sex and the softsided waterbed.

Monday, June 2, 2008

Waterbed Myths Part 3; The Seasickness Myth

Perhaps the most mind boggling and inane comments we quite often hear about in our industry about waterbeds are the ones that perpetuate the seasick myth. This is pure ignorance.
Wikipedia defines seasickness as; "A form of motion sickness characterized by a feeling of nausea and, in extreme cases, vertigo experienced after spending time on a craft on water".
This is usually caused by visual confusion and inner ear imbalance due to loss of horizon and constant pitch and roll of the sea for a long period of time.
That said, let me go on the record as saying nobody has ever gotten seasick on a waterbed, period. Many people think it's just a funny thing to comment when they lay down on a full motion watermattress for the first time. As a salesman, many times I would chuckle to be polite, ever pretending to have heard it for the first time, but quickly changing the subject to waveless waterbeds as a "solution" for that "problem".
The truth is, we sell more full motion mattress than we do ultra waveless waterbed mattresses, which clearly indicates that many people love the gentle rolling motion of flotation sleep. A free flow mattress will rock for about 10-15 seconds after laying down, then it will remain motionless until it is pushed again. Different degrees of wavelessness are achieved by manufacturing watermattresses with more or less wave inhibitor inside. These are known as fiberfill mattresses. The greater the density and volume of fiber inside the mattress determines how much motion is reduced. An ultra waveless usually has 8-10 layers of nylon fiber throughout the entire inside (zero second stop), while an 80% waveless watermattress will have 3-5 layers occupying about two thirds of the interior (3-5 second stop). That is how wave reduction is achieved.
So let's hope this puts yet another waterbed myth to bed. Seasickness is caused by the sea, not by a waterbed!

Wednesday, May 28, 2008

Waterbed Myths Part 2- The Weight Myth

"I can't have a waterbed because my bedroom is upstairs, and i'm afraid it will fall through the floor". Well, if your floor cannot support a waterbed, you've got much bigger problems than that. You had better move, and soon. Most people are ignorant of the fact that a properly filled water mattress puts less stress on it's supporting structure than does an average adult walking on it. This is a fact, not my opinion. You see, water weighs five pounds per square foot, per inch depth. A deepfill waterbed, when filled correctly, has about 7-8 inches of water. If you did the math, you would know that it equates to no more than 40 lbs per square foot. In terms of floor loading, this is well within the building code standards. A person like myself, weighing 250 lbs, puts as much weight in less than a square foot by simply walking, and I have never collapsed a floor. The following common household fixtures exert significantly more stress on a floor than does a waterbed; A filled refrigerator, a grand piano, a fish tank, a toilet, a filled bathtub or jacuzzi, or even a couch with three fat adults seated upon it. While the gross weight of a California king sized waterbed can be as much as a ton, it's weight is spread out over 42 square feet. Please bear in mind that it's not the overall weight to consider when calculating floor loads, it's the weight per square foot, or, in this case, the depth of the water. By the same token, the roof over your house weighs several tons. This weight, however is spread out over the entire house causing it to weigh just a few pounds per square foot. Think about this; a hexagonal sixty gallon fishtank has a depth of about 30 inches in about three square feet of area, which translates to 150 lbs per square foot. Additionally, in our waterbed showroom, one of our display models was set up and supported entirely by dixie cups, (about 150 of them). No tricks or gimmicks, just a display to show all our potential customers how ridiculous this assertion was, and still is; no waterbed ever has or ever will fall through anybody's floor. The media would have jumped all over a story like that So, let's put this issue to rest.

Thursday, May 22, 2008

Waterbed Myths Part 1

The waterbed industry has been plagued by the perpetuation of misinformation and myth since it's inception in the late sixties. Here we will debunk many of these fables, one by one;

Let's start with this old favorite; "Waterbeds can burst". While it is possible for a filled waterbed mattress to explode if it were to be dropped from a ten story tower, (think David Letterman), it is not at all likely to rupture under normal circumstances. You see, the water in a properly filled waterbed mattress is not under pressure. A deep fill type mattress has about eight inches of water depth inside. So the stress near the bottom is about the same as a filled glass of your favorite beverage in a container the same height.

That said, I can attest to witnessing some extreme abuses of waterbed mattresses under abnormal circumstances, and can report that they have NOT burst, ever. Check out this video from one of our competitors in California doing a publicity stunt: http://technorati.com/videos/youtube.com%2Fwatch%3Fv%3Dmx1nbWjZ4oA .

While the video should speak for itself, I'll tell you about a few other bladder abuses that I have observed; I once filled a ten-plus year old, king sized full motion waterbed mattress on a beach at my vacation home for the kids to play on. Well, the kids loved it, and it not only was jumped on just about every day all summer, but a friend of mine actually backed her jeep over it (on purpose), and it never even sprung a pinhole. To this day, there is one in my back yard playground. As a salesman, I often jumped on the showroom models just about every day to demonstrate the strength of a waterbed, and I weigh over 250 lbs.

Back in the early eighties at a grand opening party for one of our retail showrooms, we had 14 adults piled onto a floor model for a photo op. I wish I could find that picture. That waterbed store has since moved to the internet.

As I said, the water is not under pressure. If you were to stab the surface of a properly filled waterbed, you would only see a few drops of water.

So, I think I have made my point. A correctly filled waterbed, whether it be a hardside, (wood frame waterbed) or softside, full motion or waveless water mattress, will not burst, even under extreme circumstances.

Now, on to the next myth.

Saturday, May 17, 2008

Flattening a Bunched up Watermattress, aka; Fibershift

In my 25+ years of performing waterbed service, perhaps the most common problem encountered by the do-it-yourselfer that I have been most often been called to fix, is the bunching up of the fiber matrix inside a waveless watermattress due to improper handling after being drained, also know as fibershift. While some manufacturers internally tether the fiber to the mattress to prevent this from happening, most do not because it requires extra seams to do so, adding expense and vulnurability. After all, the seams and valve are what is covered under warranty, so the less seams, the better. Most hardside and softside waterbed mattresses have a free floating fiber pad inside, requiring a minimum of seams. What is key to preventing this from happening is achieving a vacuum inside the mattress, which will occur naturally when draining, either with a fill and drain kit, siphoning, or a waterbed pump. Before you start draining, be sure to remove all air bubbles through the open valve with a broomstick, after unplugging the waterbed heater. This will insure that a vacuum will occur as it drains. When the flow of water slows to a light trickle, remove the hose from the mattress and immediately repace it with the plug and cap, or you will lose the vacuum and the mattress will fill back up with air. When the mattress is full of air, the fiber pad can easily shift and bunch up into a ball and twist. Do not remove the plug and cap untill you are ready to fill it back up. The ensuing vacuum, when maintained, will make your waveless mattress easy to fold and handle, and less "blobby". If it gets puffy, it means either the cap is loose, or it has a leak. If your fiber does shift, the best way to flatten it out is to use a wet-vac. The water must first be evacuated as much as possible. First, using a wet-vac, blow air into the mattress through the valve opening. As the air inside begins to compress, turn the vac off and look inside the valve to see how the fiber is shifted. It is helpful to have the room sunlit, or as bright as possible, as the vinyl is opaque. Try to find a corner or two of the fiber and work it into a corner of the mattress. this will probably take some time, and you may need to blow it back up again as necessary with air to see inside the open valve. When you get a corner of fiber into a corner of the mattress, grasp them together and elevate as high as you can, allowing the fiber pad to unfold. Kind of like the way you make your bed up. This will allow the fiber to flatten, just like a comforter. Repeat as necessary until fiber is visually flat. Next reverse the air flow of the wet vac, (after removing the filter) and suck as much air out of the mattress as is possible, and immediately plug the valve. Do not remove the plug until you are ready with your connected hose to refill it. Any ridges or buckles in the fiber will usually work themselves out as you refill your waterbed.

Thursday, April 10, 2008

How to Drain a Waterbed

Here we will provide you with three safe and practical methods for draining a watermattress, all of which require a standard garden hose. The length of hose should be no longer than necessary to get the water away from the building by at least 10 feet or so. Too long a hose will create excess drag, and can slow the draining process, in addition to causing extra work.
Your first step as you begin to drain your waterbed is to make sure you have unplugged your waterbed heater. This is critical because as the heater loses a sufficient depth of water, it will overheat and eventually burn itself up, along with your liner and watermattress. This can be dangerous and expensive.
Next you will need to remove all the air bubbles that have accumulated inside the watermattress, also known as "burping" your waterbed. This is easily done by gently sliding a broom stick (or any similarly shaped device) with gentle, downward pressure, across the top surface of the vinyl, toward the uncapped valve, allowing any trapped gasses to vent out of the watermattress. This is also a critical step to evacuating as much water as possible. Remember, that the last ten gallons can be the most difficult to remove because as the water drains out, a vacuum is created inside, and as the bed empties out, any air present will negate the vacuum, making the mattress very heavy and bulky. So be sure to remove all the air bubbles before proceeding. Now you must choose which draining method you will use.
The first method of draining is to use a venturi pump. This is the T-shaped plastic fitting found in a waterbed fill and drain kit. Most reputable waterbed dealers will provide this with the sale of a waterbed, and they should have come with instructions. While these do work well on free flow and semi-waveless water mattresses, they are not recommended to drain an ultra-waveless (90-100% wavelessness) mattress. This is because they do not provide a strong enough vacuum that is needed in order to drain them sufficently to be picked up. These pumps rely on water pressure and gravity. They are only effective with the water flowing downhill, and with strong water pressure. The tap water must be kept running until the mattress is empty. This is the most inefficent and time consuming method. It also wastes a lot of water.If you live in a basement, it may be your only choice, unless you can get your hands on an electric pump.
An electric pump is usually the fastest method. How fast is determined by how powerful your pump is, and whether the water is flowing up or downhill. Most will take 30-90 minuites. This is the most effective way to drain an ultra waveless watermattress. If you live in an apartment building, place the hose as deep as possible into a toilet bowl, and close the lid before starting. Many pumps will need to be primed (pre-filled with water) in order to get started. This method, of course, requires electricity.
The siphon method will require only a hose. A male hose adapter, which also comes with a fill and drain kit, is helpful, but not necessary. Following the above instructions, next, place the male end of the hose into the valve of the waterbed. The other end of the hose needs to be placed as low as possible, in relation to the mattress. The more vertical drop, the faster the bed will drain. Next step is to suck on the lower end of the hose to start the water flowing. Once it begins to flow downhill, it will continue to do so until there is no more water left. For the squeamish, a wet-vac can be used to start the siphon.
Whichever draining method you choose, it is also important that you replace the plug and cap quickly after removing the hose from the watermattress, preserving the vacuum. Do not allow it to back fill with air. This will ensure that the fiberfill inside a waveless mattress will not shift, and bunch up into a big lump. This will be the subject of my next blog; Fibershift.

Sunday, April 6, 2008

Why A Waterbed Mattress Pad Should Be Used

If you were to check, you would find that nearly every waterbed mattress manufacturer attaches a tag to the valve with several warnings and recommendations. Among these is that a mattress pad should be placed under the waterbed sheets to protect the vinyl from bodily oils, which is corporatespeak for sweat. This is actually good advice. You see, vinyl is an oil-based petroleum product. This means that oil will literally make it or break it, and now we know sweat is oil. There are some who also like to rub oil products on their bodies like baby oil . These oils can seep through the sheets and permeate the vinyl causing it to harden. This is not good. You want your vinyl to stay soft and supple. Hardened vinyl is noisy, uncomfortable, and brittle. Brittle vinyl can, and usually will crack, which translates to a leak. Again, not good. This can be avoided completely by simply using a good, hypo allergenic waterbed mattress pad. Made of cotton or polyester, It will “take a bullet” for your mattress. If you feel patches of hardened vinyl in the area of the mattress that you sleep on every night, your bed has this condition, and you should begin to think about replacing your water mattress while time is still on your side. And don’t forget a mattress pad too. Whether you use an economical flat anchor band mattress pad, or a fitted luxurious, billowy, quilted mattress pad, it will keep your waterbed mattress sufficiently protected. Equally as important is the fact that your waterbed will be better insulated from heat loss as a result, and your waterbed heater will use less energy. Perhaps what you will notice most of all is that it will feel softer and much more comfortable with an added layer of breathable material between yourself and the vinyl surface. A good quality mattress pad will usually last 2-3 years, depending how often it is laundered. You will thank me in the morning. Sweet dreams.